Residential/Light Commercial Use Suitable for Residential/Light Commercial Use (Kitchens, Bathrooms and Laundries in Hotels, Motels and Retirement Villages).

Guarantee 1 Year Guarantee on Toilet Seat and Cistern Parts

Guarantee 10 Year Guarantee

4 Star WELS rating Allows for a 4.5 litre full flush and a 3 litre half flush

Hygienic Rimless Design Hygienic and easy to clean

Hand Finished Hand Finished Vitreous China.

Set Out: S Pan 310mm

Set Out: P Pan 180mm

Soft Close Seat The Soft Close automatic closure system finally puts an end to noisy closing WC seats. Just a fingertip touch and the lid closes all by itself, gently and silently.

BPIR - Importer Robertson NZ Ltd.

BPIR - Place of Manufacture China

BPIR - Relevance Documentation

For detailed information on Relevant Building Codes & Statement of Contribution please visit ROBERTSON.CO.NZ/DOWNLOADS and browse the relevant section

BPIR - Scope of use Accessible toilets are designed with features like higher seats, grab rails, and wider dimensions to accommodate users with disabilities or limited mobility. Overheight toilets provide a taller seating position for enhanced comfort and accessibility, particularly suited for elderly or disabled users. Back to wall pans are installed flush against the wall, hiding plumbing for a clean, streamlined bathroom appearance.

BPIR - B2.3.1 Durability This product complies with Building Code Regulation B2.3.1 Durability

BPIR - G12.3.7 G12 Water Supplies This product complies with Building Code Regulation G12.3.7 G12 Water Supplies

BPIR - G1.2.1 WC Pans This product complies with Building Code Regulation G1.2.1 Personal Hygiene - WC Pans

BPIR - G1.2.2 Flushing Systems This product complies with Building Code Regulation Personal Hygiene - Flushing Systems

Additional Information Note: This Pan has a projection of 800mm. The Australian Standard for access for people with disabilities in buildings, AS 1428.1:2009, specifies that the front of the pan is to be a distance of 800 mm from the wall at the rear of the pan. The corresponding dimension in Acceptable Solution G1/AS1 is 700-750 mm. The guidance is that, if an Australian pan and pan position is to be used, then the compartment needs to be 50 mm, or more, longer than given in G1/AS1. This layout has the advantage of giving more space for a wheelchair user when making a transfer from alongside.